Australia's leading supplier of automotive electrical solutions
The 75910 Series Battery Master Disconnect Switch from Cole Hersee is a DPST type switch rated at 125A continuous and utilizes silver contacts for excellent electrical and thermal conductivity whilst remaining relatively unhindered by surface corrosion or oxidation. The case is chrome plated steel with an alignment pin to prevent shifting in the mounting cavity. The shaft is O-ring sealed and the studs sealed with gaskets to create a weather resistant unit.
| Specification8 | Make before break contact: Yes |
|---|---|
| Specification11 | Terminals - Width: 3/8-24 (x 2) |
| Specification9 | Mounting Stem: 3/4-24 Thread; L 13mm |
| Specification10 | Panel Thickness: <=6.5mm |
| Specification7 | Intermittent Rating 5 mins: 800A/20A |
| Colour | Chrome Lever |
| Stud Size (mm) | 10-32 (x 2) |
| Voltage | 6 - 36V |
| Type | DPST Field/Battery |
| Specification6 | Ingress Protection: IP64 |
| Specification1 | Alternator Field Disconnect: Yes |
| Brand | Cole Hersee |
| Specification3 | Cable Size required: 2/0 |
| Specification4 | Field Terminals Amp.: 20A Cont. |
| Specification5 | Ignition Protected: No |
| Amperage | 125A |
| Specification2 | Amperage - Surge: 1000A |
| Features | Weather Resistant O-Ring Sealed; Pin Locator For A |
| Contacts | Silver |
